QED LANDTEC i-Q Series, Operation Manual

Page: 10 / 51

Operation Manual
GEM and GEM PRO
OMiQGEM-L Issue.02
Page 10 of 51
WARNING
EQUIPMENT MISUSE HAZARD
Misuse can cause death or serious injury.
•
Do not use the equipment when fatigued or under the influence of drugs or alcohol.
•
Do not exceed the working parameters outlined in the intrinsic safety warnings.
•
The input pressure for the i-Q Series should not /- 500 mbar relative to
atmospheric pressure and the output pressure should not /- 100 mbar relative to
atmospheric pressure.
•
Gas instruments are sensitive pieces of scientific equipment and must be treated as such. If
the equipment is used in a manner not specified by the manufacturer, the protection
provided by the instrument may be impaired.
•
If the equipment is likely to be exposed to aggressive substances (e.g. acidic liquids, gases
that may attack metals, or solvents that may affect polymeric materials) then it is the
responsibility of the user to take suitable precautions. Contact QED or our distributor if
there are concerns.
•
Do not alter or modify the equipment outside of any instructions provided by QED.
•
Only QED-approved components are to be used as replacement parts. Alternatives may void
agency approvals and create safety hazards.
•
The instrument has been designed to be used in explosive atmospheres as defined by the
classification. The instrument can be configured to measure low levels of several gases, but
may not be certified for use in potentially explosive atmospheres of these gases.
•
Use the equipment only for its intended purpose. Contact QED or our distributors for
information.
•
Repair of this equipment shall be carried out following the applicable code of practice.
•
Check equipment for damage before each use. Contact QED or our distributors if there are
concerns.
•
When the battery is ready for disposal, it must be disposed of under the ordinance of the
local authority and not disposed of through general waste.
•
Keep children and animals away from the work area.
•
Comply with all applicable safety regulations.
Note: For further information please contact Technical Support at QED on:
QED Environmental Systems Ltd.
+44(0)333 800 0088
technical@qedenv.co.uk
QED Environmental Systems, Inc.
+1 (800) 624-2026
service@qedenv.com