QED LANDTEC i-Q Series, Operation Manual, Page: 37 / 51

Operation Manual
GEM and GEM PRO
OMiQGEM-L Issue.02
Page 37 of 51
REPLACEMENT PROCESS
REMOVAL
The modules are locked in position using ¼ turn locking screws, as indicated by the information label, see below .
Modules in the locked position are identified by screw head slots in the vertical orientation. Modules in the
unlocked position are identified by screw head slots in the horizontal orientation.
1) Using the supplied tool, select the Slotted No 4.5mm screwdriver and turn the locking screws anti-clockwise
a ¼ turn.
2) Carefully but firmly lift the module upwards.
Note: Only turn the module locking screws ¼ turn. Do not over-rotate.
Note: The pressure module has no locking screws and can be gently lifted upwards.
REPLACEMENT
To prevent inhalation of harmful gases:
•
All module bays must have a module present.
•
Ensure modules are located correctly and correctly tightened using the ¼-turn locking screw.
1) Ensure the module screws are in the unlocked position (horizontal).
2) Rest the module above the empty bay in the correct orientation, ensuring that the module pins correspond
with the gold pads on the board.