QED LANDTEC i-Q Series, Operation Manual, Page: 43 / 51

Operation Manual
GEM and GEM PRO
OMiQGEM-L Issue.02
Page 43 of 51
Figure 21 – Affinity
To replace the Affinity batteries:
1) Using the supplied Phillips No. 1 screwdriver, unscrew the two screws on the battery cover found on the
rear of the case, and remove
– see Figure 22 .
Note: The battery cover screws are retaining and should remain inside the cover.
Figure 22 – Affinity Battery Access
2) Remove the old batteries and dispose under the ordinance of the local authority.
3) Replace with 2 x AA Type Energizer
®
L91 cells.
Note: Ensure correct orientation of batteries.
4) Replace battery cover and using Phillips No. 1 screwdriver, secure cover in place.
5) Affinity is now ready to be switched on and paired with an i-Q instrument.
Note: It is the operator’s responsibilit y to keep a record of when and what maintenance has been performed.
Note: In the event of malfunction or damage, please contact QED or an authorized representative.
CLEANING AND DECONTAMINATION
The equipment must have its battery removed prior to cleaning or decontamination. The enclosure can be
cleaned externally using a mild soapy water and non-abrasive cloth.
Should the need arise for the i-Q instrument to be returned to QED, it is the responsibility of the owner to
ensure that the instrument has been decontaminated or that QED has been made aware of any contaminants
that may be present, prior to it being returned.
1