I
RON
RAN-RU4 MO G
EN
A P
RECAUTIONARY
M
EASURES
VII
Equipment Handling Practices
Reduce the risk of personal injury or equipment damage:
Conform to local occupational health and safety requirements when moving and
lifting equipment.
Use mechanical assistance or other suitable assistance when moving and lifting
equipment.
To reduce the weight for easier handling, remove any easily detachable
components.
Never lift or move your system solely by the handle on the component.
The power supply cord(s) must be plugged into the socket-outlet(s) that is / are
provided with a suitable earth ground.
Laser Class 1 optical transceiver shall be used only.
This is a Class 1 Laser product. Use only IEC 60825-1 certified Optical Fiber
Transceiver with minimum operating temperature at 75 degree C.
Never open the equipment. For safety reasons, the equipment should be opened
only by qualified skilled personnel.
The system can’t be hosed down or splashed with water.
Power and Electrical Warnings
CAUTION!
Double Pole / Neutral Fusing.
CAUTION!
Must use current limiting type circuit breaker, peak current < 300 A.
CAUTION!
Make sure the system is removed from the pole or wall before servicing any
components.
CAUTION!
To avoid risk of electric shock, disconnect all cabling from the system and
remove the system from the pole or wall.
CAUTION!
For IronRAN-RU4 MO GenA devices stored in -40°C environments for over 1
hour, a warm up period of 1.5 hours is required before cell connection.
!
!
!
!
!