I
NSTALLING
B
RACKET
A
ON
D
EVICE
I
NSTALLING
H
ARDWARE
2-3
Installing Bracket A on Device
Before you begin any procedure make sure the necessary components and tools are
prepared. All screws must be tightened by using a Phillips #2 screwdriver.
1. Position the device so the antenna connectors are oriented as shown in the
following figure.
2. Locate the mounting hole area on the device and align the bracket (A) over the
screw holes. Ensure the directional marker (arrow) is pointing towards the antenna
connectors signifying a correct bracket alignment.
3. Insert the M8 A screws to secure the bracket to the device.
Figure 2-1.
Installing Bracket A on Device
Once the bracket (A) is installed, the device can be mounted on a wall or pole.
Installing the RRU on a Wall
Before you begin any procedure make sure the necessary components and tools are
prepared. All screws must be tightened by using a Phillips #2 screwdriver.
CAUTION!
Ensure all power is disconnected from the system before proceeding.
CAUTION!
Ensure all power is disconnected from the system before proceeding.
!
!