Q3 ENERGIE QX3 Series, Installation And Operating Instructions Manual, Page: 93 / 109

_____________________________________________________________________________________________
Q3 ENERGIE Installation and operating instructions Q X ³ series 93/109
Version 1.0, Stand 27.04.2015
Installation and operating instructions
Q
X ³ series
Installation:
Field Function
Country selection Select the country in which your inverter is operated from the list.
Power reduction
Select the power reduction regulation you need for your system.
You can:
- Set no power reduction
- Set the power reduction using the ripple control receiver;
configuration takes place using a table. You
must enter the corresponding power reduction for every possible
logical combination
or for every contact here.
- Select static power reduction of 70% To do this, enter the rated
power of your
generator in the provided box.
- Select dynamic power of 70%, measurement of own consumption
via S0 interface.
- Select external control by a measurement and control module.
More information can be found in the following
Chapter "7.3.4 Power reduction".
Reduction of static power to
70%
Enter the nominal power of the PV generator here.
cos(phi) settings
You grid operator has informed you of the cos(phi) correction factors
that you must set for your inverter location. Set these in the
correction table.
Moving average voltage
Set the value for the moving average voltage. You can obtain this
from your grid operator.