_____________________________________________________________________________________________
Q3
ENERGIE
Installation and operating instructions Q
X
³ series
73/109
Version 1.0, Stand 27.04.2015
Installation and operating instructions
Q
X
³ series
5.4
Display settings, operating values and measured values
You can see the menu structure of the main menu in the table below.
Main Menu:
No.
Menu
Function
1
Measured values
Measurements of the current inverter
2
Yields
Yield data of the current inverter
3
Information
Logbook and system info of the inverter
4
Group devices
Group values of the inverter group, or values of a single
inverter within the group
5
Configuration
1
Provides configuration settings of the inverter
6
USB-Stick²
Saving measured values, system backup, system recovery or
software update
7
Reset PIN²
Saving measured values, system backup, system recovery or
software update
1
See Chapter 6.3 "Configuration"
² See Chapter 6.5 "Backing up data, system recovery and inverter update"
5.4.2
Measurement values
If you select the item “measured values” in the main menu, the menu shown in
the table will open.
Measured values
1
:
No.
Menu
Function
1
Total power
Displays the current total power of the system
2
Normalized power
Displays the normalized power to maximum power
3
PV power
Displays the power for every DC string
4
PV voltage
Displays the voltage for every DC string
5
PV current
Displays the current for every DC string
6
Grid power
Displays the power (feed-in) in the grid
7
Mains voltage
Displays the grid voltage at the connection point
8
Mains current
Time Displays the current in or out of the grid
9
Insulation resistance
Displays the insulation resistance
10
Mains frequency
Displays grid frequency
11
Temperature *
Displays the outdoor temperature
12
Radiation *
Displays the measured radiation
1
You can navigate through the measured values using the arrow keys.
* Requires a temperature/radiation sensor (optional)