QSTC201/211 IP-CAMERA USER MANUAL
26
5
Remote Live Surveillance
5.1
Main Menu Setup
User can remotely setup the parameters of the device. Functions of remote
configurations include: system configuration, channel configuration, alarm
configuration, network configuration, notification configuration and advance
configuration. User should first select the server on the menu list on the left, and
then setup the relative parameters. When a user sets up parameters of a certain
device, other users can not setup this device.
5.2
System Configuration
The “channel configuration” includes three submenus: server basic configuration,
date & time and SD Card.
5.2.1
Server basic configuration
In the “Server basic configuration” interface, user can setup the device name,
device ID and video format and can also check the relative information of the
server
Setting steps:
1. Click the "Server configuration" icon, the System configuration interface will
appear in the operation area.
2. Click the “Server basic configuration ", see Figure 5-1:
3."Mac Address" shows the MAC address of the device.
4. Input the name of the device in the "Device name" text box.
5. Input the device ID in the "Device ID" text box.
6. Select the video format between server and camera (in the USA we use
NTSC).
Note: After format changes the device will restart.
7. Press the "Save" button to save the settings.
Please refer to the following table for parameters and instructions of server basic
configuration.
Parameter
Meaning
Software version
The software version of the device
Software build date
The software build date of the device
Kernel version
The kernel version of the device
Hardware version
The hardware version of the device
Mac Address
MAC address of device
Device ID
Device version
Device name
Name of the device.
