![background image](http://html1.mh-extra.com/html/pylo-health/py-802-lte/py-802-lte_user-manual_1632200008.webp)
3.If the data is successfully transmitted,
the symbol will disappear and the
LCD will display before the device
turning off.
If the data transmission fails, an error
message will be shown (E6 as an example)
on the display for several seconds then
the device will turn off.
MEASUREMENT
MEASUREMENT
13
12
Taking a Measurement
1. When the monitor is off, press the
“ START/STOP ” button to turn on
the monitor. The cuff will begin to inflate and
the measurement will be taken and saved.
2. Once measurement is taken, the device will
connect to the network and start transmission.
The symbol will blink while the device is
transmitting.
LCD display
Inflating and measuring
Adjust the zero
Display and save the results
You can press “ START/STOP ” button at any time to stop measuring during the process of
measurement.
Tip:
In the case of a data transmission failure
(E5 or E6), up to 60 measurements are
saved on the device and will be sent when
a successful connection is achieved.