1.Battery powered mode:
6VDC 4*AA batteries
2.AC adaptor powered mode:
6V 1A (not included)
(Please only use a manufacturer authorized AC adapter.)
See picture on right hand side for power port location.
If this is your first time using the device:
1.Slide open the battery door on the back of the device.
2.Install the batteries provided with the device. Follow the diagram inside the battery
compartment for correct placeme—the springs should align with the negative sign
on the batteries.
3.Slide the battery door closed.
Replace the batteries whenever the
following occurs:
• The icon displays
• The display dims
• The display does not light up
In order to get the best effect and protect your monitor,
please use the the right batteries and special power adapter
which complies with local safety standard.
•
Do not use new and used batteries together.
•
Do not use different types of batteries together.
•
Do not dispose the batteries in fire. Batteries may explode or leak.
•
Remove batteries if the device is not likely to be used for some
time.
•
Used batteries are harmful to the environment.
Do not dispose with daily garbage.
•
Remove the old batteries from the device following your
local recycling guidelines.
CUFFTUBE
CUFF
START/STOP BUTTON
DC POWER SOCKET
CUFF TUBE CONNECTOR
BATTERY COMPARTMENT
BATTERY DOOR
AC adaptor
INTRODUCTION
BEFORE YOU START
9
8
Components of the Device
Included Parts List
The Choice of Power Supply
Installing and Replacing the Batteries
Component list of
pressure measuring system:
1 Cuff
2 Air pipe
3 PCBA
4 Pump
1. Cellular Blood Pressure
Monitor (PY-802-LTE)
3. User manual
2. Cuff (22~42cm)
(Type BF applied part)
4. Four (4) AA batteries
CAUTION
CAUTION
