Pyle DT-9918T, Operating Instruction, Page: 26 / 28

26
Do not operate the instrument with the battery cover
removed
1. Disconnect the test leads from the meter.
2. Open the battery cover by loosening the screw
using a Phillips head screwdriver.
3. Insert the battery into battery holder, observing the
correct polarity.
4. Put the battery cover back in place. Secure with the
two screws.
NOTE : If your meter does not work properly, check the
fuses and battery to make sure that they are still good
and that they are properly inserted.
REPLACING THE FUSES
WARNING : To avoid electric shock, disconnect the
test leads from any source of voltage before
removing the fuse /battery cover.
1. Disconnect the test leads from the meter and any
item under test.
2. Open the fuse door by loosening the screw on the