Pyle DT-9918T, Operating Instruction

Page: 17 / 28

17
discharge the capacitor with some other apparatus.
FREQUENCY MEASUREMENT
1. Set the function switch to the Hz position.
2. Insert the black test lead banana plug into the
negative (COM) jack and the red test lead banana
plug into the positive Hz jack.
3. Touch the test probe tips to the circuit under test.
4.
Read the frequency in the display. The digital
reading will indicate the proper decimal point,
symbols (kHz, MHz) and value.
TEMPERATURE MEASUREMENT
1. Set the function switch to the Type K ºF or ºC
position.
2. Insert the Temperature Probe into the input jacks,
making sure to observe the correct polarity.
3. Press the MODE button until “ºF or ºC” appears in
the display.
4. Touch the Temperature Probe head to the part
whose temperature you wish to measure. Keep the
probe touching the part under test until the reading