9. SPECIAL KEYS
During programs rendering you can press one of special keys (EFFECTS) in any moment, to
activate, for instance, the strobo or smoke generator. The chosen effect will be active as long, as
long you will hold the "EXTRA" key pressed.
9.1. MANUAL CONTROL
11
By pressing the "BLACKOUT" key you can dimm all the controlled devices. Regardless of
currently rendered program, the controller sends to all the 256 channels a "0" value. The active
status of this feature is shown by the lit LED indicator in the "BLACKOUT" key. By pressing the
key again you can return to the regular operation mode.
10. BLACKOUT FEATURE
11. PROGRAMS COPYING TO SOLO RL CONTROLLER
SPEED
PC
SPEED
PC
8. COLLECTIONS (CUEs) RENDERING
2. Press the CUE key in the PROGRAMING block.
3. Press one of the keys from CUE SELECTION block. The
collection ascribed will be launched.
1. Turn “BLACKOUT” off.
MIDI
CUE
6
During program rendering you can manually interfere in particular devices operation. After
selecting the device in the SCANNER block you can change its settings with the sliders - the
selected device responds to the changes in the channels, where the sliders have been moved
only, the remaining channels are controlled according to the rendered program.
By dint of this feature you can illuminate a selected point with the chosen scanner, without
necessity of program modification and interrupting other scanners operation.
The selected scanner will return to programmed settings automatically after the "LOAD
PROGRAM" key is pressed.
1. Connect the Mirage RL and Solo RL controllers with the programming cable (both devices have
to be switched off!).
2. When holding the "SPEED/PC" key pressed switch Mirage RL on. Yellow "PC" LED will light up.
3. Switch Solo RL on. "In" inscriptions will show on Solo RL display.
4. Press the "LOAD" key on Solo RL - the data transmission will start.
5. When the transmission is carried out properly, the "Ed" inscription will appear on Solo RL
display.
6. When errors appear during the transmission, "Er" insription will be displayed on Solo RL
controller. In such case return to p.1.
