MR2 Manual
Revision B
/
June 2021
Page 11
of
34
14.
The valve gasket is the black mat under the air body. Remove the valve gasket and
clean it.
15.
Examine the valve gasket for any cracks or signs of wear on the side that was facing
the metering sleeve. If the valve gasket is worn, it will be necessary to replace. DO
NOT flip the valve gasket over or you can damage the valve.
Figure 8: Worn Valve Gasket
16.
Use a 3 mm hex key to remove the four M4x12 screws on the bottom of the fluid
outlet.
Figure 9: Remove the Fluid Outlet
17.
Remove the fluid outlet.
Figure 10: Fluid Outlet Removed
18.
Examine the O-rings in the fluid distribution block and replace if damaged.
