MR2 Manual
Revision B
/
June 2021
Page 23
of
34
12.
Install the six M4x55 screws and use a 3 mm hex key to tighten them.
Figure 44: Install and Tighten Screws
13.
Apply a small amount of grease to the two metering sleeve O-rings and install them.
Figure 45: Metering Sleeve O-rings
14.
Align the material outlet with the metering sleeve.
15.
Install th
e four M4x16 bolts in the material outlet and tighten the bolts in an “X”
pattern.
Figure 46: Install the Material Outlet
16.
Install the clamp adapter seal.
