PURSUIT Denali 28, Owner'S Manual

Page: 106 / 148

DENALI 28
Stains can be removed with a metal polish or fine polishing compound. To minimize corrosion,
use a caulking compound to bed hardware and fasteners mounted to aluminum fabrications. If the
anodized coating is badly scratched it can be touched up with paint. With proper care, anodized
aluminum will provide many years of service.
Chrome Hardware
Use a good chrome cleaner and polish on all chrome hardware.
Acrylic Plastic Glass
Acrylic plastic glass scratches easily. Never use a dry cloth or glass cleaning solutions on acrylic
glass. Use a soft cloth and mild soap and water for routine cleaning. Solvents and products
containing ammonia can permanently damage acrylic glass.
Fine scratches can be removed with a fine automotive clear coat polishing compound. A coat of
automotive or boat wax is beneficial to protect the surface. Do not use the following on acrylic
plastic glass:
Abrasive cleaners Acetone
Solvents Alcohol
Glass cleaners Cleaners containing ammonia
Simulated Wood grain Panels
The simulated wood grain instrument and switch panels are made using a process called D-
Technik
®
. It is a three dimensional, multicolored process reproducing a complete selection of wood
grain and other noble patterns such as marble or carbon fiber. Each panel is clear coated with a
special exterior finish and hand buffed to obtain a rich deep high gloss wet look. The clear coat
is formulated for the marine environment, but basic precautions and regular care are necessary to
protect it.
DON'T:
•
Drill or cut any holes through the clear coat.
• Rub the finish using a lot of pressure.
• Use any solvent of any kind on the finish.
• Use rubbing compound of any kind on the finish.
• Use any cleaners with ammonia or an abrasive on the finish.
• Use any Scotchbrite
TM
type product on the finish.
• Use any powder abrasive such as Ajax
TM
or Soft Scrub
TM
on the finish.
Preventative Care
Waxing the D-Technik will protect against water spots. The rain water is contaminated and if the
D-Technik panels are not waxed, water spots will be apparent. Before using your boat and at
regular intervals thereafter, we recommend waxing the D-technik panels with one of the following
products:
•
Premium marine Polish with Teflon
• Starbrite
®
#85714 for Paste Wax
• Starbrite
®
#85732 for Liquid Wax
13-4