•
It is normal that steam escapes during operation. >>>
This is not a fault.
•
When the metal parts are heated, they may expand and cause noise. >>>
This is not a fault.
•
The mains fuse is defective or has tripped. >>>
Check fuses in the fuse box. If necessary,
replace or reset them.
•
Product is not plugged into the (grounded) socket. >>>
Check the plug connection.
•
Buttons/knobs/keys on the control panel do not function. >>>
Keylock may be enabled. Please
disable it. (See. Using the keylock, page 20 )
•
Oven lamp is defective. >>>
Replace oven lamp.
•
Power is cut. >>>
Check if there is power. Check the fuses in the fuse box. If necessary,
replace or reset the fuses.
•
Function and/or Temperature are not set. >>>
Set the function and the temperature with the
Function and/or Temperature knob/key.
•
In models equipped with a timer, the timer is not adjusted. >>>
Adjust the time.
(In products with microwave oven, timer controls only microwave oven.)
•
Power is cut. >>>
Check if there is power. Check the fuses in the fuse box. If necessary,
replace or reset the fuses.
•
A previous power outage has occurred. >>>
Adjust the time / Switch of the product and switch
it on again.
Consult the Authorised Service Agent or the
dealer where you have purchased the
product if you can not remedy the trouble
although you have implemented the
instructions in this section. Never attempt to
repair a defective product yourself.
(In models with timer) Clock display is blinking or clock symbol is on.
Oven does not heat.
Oven light does not work.
Product does not operate.
Product emits metal noises while heating and cooling.
Oven emits steam when it is in use.
7
Troubleshooting
Summary of Contents for MFA 604
