PULSAR MEASUREMENT
43
SS PIPE MOUNTING BAND – OPTION VSJ
CODE
BAND SIZE
VSJ6
6”/150 mm ID pipes
VSJ8
8”/200 mm ID pipes
VSJ10
10”/250 mm ID pipes
VSJ12
12”/300 mm ID pipes
VSJ14
14”/350 mm ID pipes
VSJ15
15”/375 mm ID pipes
VSJ16
16”/400 mm ID pipes
VSJ18
18”/450 mm ID pipes
VSJ20
20”/500 mm ID pipes
VSJ24
24”/600 mm ID pipes
VSJ30
30”/750 mm ID pipes
VSJ32-40 32-40” / 800-1000 mm ID pipes
VSJ42-54 42-54” / 1100-1375 mm ID pipes
VSJ56-72 56-72” / 1400-1800 mm ID pipes
DETAIL
BAND ADJUSTMENT
JACK
VSJ PIPE MOUNTING BAND
BAND
ADJUSTMENT JACK
SENSOR MOUNTING
BRACKET
Mounting Instructions:
Install the stainless steel pipe band with the
sensor mounting bracket at the invert (bottom)
of the pipe. Ensure that the sensor bracket is
parallel to the water surface (check with a
level). Mount so the tapered end of the sensor
will point upstream and the sensor cable will
point downstream. Turn the ¼” hex nut
clockwise to expand the bracket and secure to
the pipe wall by friction fit.
Insert the sensor into the mounting bracket and
clip or tie wrap the sensor cable securely to the
stainless steel pipe band.
FASTEN SENSOR
CABLE TO PIPE OR
CHANNEL WITH
METAL CLIPS OR
TIE WRAPS
SENSOR
END VIEW
VSJ HALF-PIPE
MOUNTING BAND
ADJUSTMENT
JACK
SENSOR MOUNTING
BRACKET
END
BRACKET
FLOW
Use optional VSJ stainless steel Pipe Mounting Bands
for easy Sensor installation in round pipes.
Each Pipe Band includes:
Band Adjustment Jack allowing ±0.5" (13 mm) adjustment from
the nominal band size.
VSJ6 and VSJ8 bands do not include adjustment jacks -
Note:
they secure to pipe by spring tension.
Stainless steel bracket for Sensor mounting.
Pre-drilled for tie wraps (included) to secure Sensor cable.
