FLOWCERT LITE (UL) INSTRUCTION MANUAL
124
P905 Sensitivity
This parameter determines the sensitivity of the unit. Please consult Pulsar
for further information and assistance on changing the value of this
parameter.
P906 Side Clearance
This parameter is used to set the distance by which the DATEM trace will
“sta
nd-
off” from around unwanted echoes such as obstructions. Please
consult Pulsar for further information and assistance on changing the value
of this parameter.
DATEM Parameters
The following two parameters are used to make changes to the DATEM trace
such as setting it to its default value or using it to select a particular echo,
both parameters are accessed directly by simply entering
Program Mode
then typing in the
parameter number
and pressing
ENTER
.
P020 Set DATEM 1
This parameter allows DATEM to be reset to its default value or alternatively
allows the user to “Capture” a DATEM trace. It should be noted that when
using option 1 = Capture, all echoes seen will be eliminated by DATEM.
OPTION
DESCRIPTION
0 = Quit
Exit without any change to the present DATEM
trace.
1 = Capture
DATEM trace of entire visible range taken and
all echo returns referenced out.
2 = Default
DATEM trace will assume its default value
3 = Def Reset
Default DATEM to factory settings.
4 = Set Min DATEM
When set, DATEM levels at this point will be
accepted as a minimum.
