Pubert DEVOR X60S-X55L, Operating Instructions Manual

Page: 26 / 72

11- EN
VI / USING THE SHREDDER
a) Starting the motor
SUBARU EP 17 LONCIN LC 170
1
2
3
4
5
b) Operation
Material suitable for shred-
ding:
cut flowers, hedge trim-
mings, branches no more than
45 mm in diameter.
You must not put glass, stones,
metal or plastic in the shredder.
you must therefore check that
the plant matter to be shredded
does not contain any foreign ob-
jects.
If a foreign object accidentally
gets into the shredder, stop it im-
mediately, disconnect the spark
plug cable, inspect the machine
and if necessary have repairs
carried out by an approved ser-
vice agent.
- Wait until the motor has rea-
ched its maximum speed. only
work when at maximum speed.
- Place plant matter in the plastic
feeding chute, standing to the
right of it to avoid any possible
kickback of material.
- Make sure no-one is standing
in the discharge zone.
- !!WARNING!! never operate
the shredder without the dis-
charge pipe deflector (risk of
projectiles and possibility of co-
ming into contact with the cutting
assembly).
- always give the shredder time
to discharge plant matter before
adding more (risk of jamming).
- If necessary remove a branch
to allow the shredder to get back
up to maximum speed.
- If the shredder has a tendency
to swallow branches and then
stall, hold them back slightly.
c) Tips
- avoid shredding damp plant matter (risk of jamming).
- avoid shredding very dry wood
(when harder it puts more stress on the blades).
- Ideal for large diameter freshly cut wood.
For very leafy branches, allow to dry out for 2 days.
- For easier operating conditions, always work with well-
sharpened blades.
1 2
3 4
5 6