4
Setup
Warning:
Do not attempt to remove the equipment from the packaging
alone. Two people are required at all times to move the equipment.
Place the
ENDEAVOUR
on a sturdy table or cart. Check to verify that both
fold plates are properly installed [see Figures 4 & 5]. Both fold plates should
rest snugly on the placement pins.
Figure 4: Upper Fold Plate in
Proper Position
Figure 5: Lower Fold Plate in
Proper Position
Insert the power cord into the
ENDEAVOUR
first, and then into a standard
115V AC 60 Hz outlet.
The power cord must be accessible for disconnect.
