1
Operator Safety
Please review and follow all the safety precautions to ensure safe
equipment operation.
The user is responsible for safe operating
conditions. Read all operating instructions prior to operating the
ENDEAVOUR
.
Warning:
Do not attempt to handle the equipment alone. It requires
two people to handle and lift the equipment out of the packaging.
Warning:
This unit contains moving parts. Watch for
Caution
,
Warning
, and
Electrical
stickers detailing proper operating conditions
and user safety.
Never remove guards or product safety switches.
Removal of
guards or switches will cause the unit to run improperly and can result
in personal injury.
Keep all hands, fingers and objects away from moving parts.
Never attempt to reach into the
ENDEAVOUR
while the power is on.
Turn off the
ENDEAVOUR
and disconnect the power cord before
cleaning or servicing the
ENDEAVOUR
, and before removing either
fold plate. Injury may occur if proper operating procedure is not
followed.
Plug the power cord into 115 VAC 60 Hz outlet only.
Voltage up to
120 volts will not damage the
ENDEAVOUR
.
The Power Cord and Plug must be accessible at all times for
disconnection.
This unit is equipped with a 3-Wire grounded electrical cord. If the cord
becomes damaged and needs to be replaced, it must be replaced with
an authorized part available through the manufacturer or an authorized
service agent.
All
ENDEAVOUR
maintenance should be performed only by factory
authorized service personnel using factory authorized replacement
parts. Contact PTM Document Systems for more information.
Keep product away from extreme heat & moisture.
Never
operate
ENDEAVOUR
while tired, drowsy, or under the
influence of medication, drugs, or alcohol. Failure to do so can result in
personal injury.
Never operate unit with loose clothing or jewelry. Contain all long hair
and neck ties prior to operating
ENDEAVOUR
. Failure to do so could
result in clothing, jewelry, or hair becoming entangled in moving parts.
