Chapter 4: Connectors
48
200-pin SDRAM Sockets (P6, P7)
For information on memory compatibility, see
.
Note: Memory is not a field serviceable item. Return the module to PT for memory
replacement. See
“Return Merchandise Authorization (RMA),” on page 19
for more information
about returning merchandise.
Battery Socket (BT1)
“Real-time Clock with Battery Backup,” on page 29
for information on battery compatibility.
Note: The battery is not a field serviceable item. Return the module to PT for memory
replacement. See
“Return Merchandise Authorization (RMA),” on page 19
for more information
about returning merchandise.
MiniSD Card Connector (P1)
MiniSD card support is provided via a miniSD card socket located on the board. See
“Working with the MiniSD Card,” on page 35
information about miniSD card installation and removal.
Payload Processor IMC Connector (P2, P3)
The payload processor in circuit emulator is accesses through connectors P2 and P3.
provides the pinout.
Table 4-6:
Payload Processor ICE and JTAG PCB Connector Pinout
P3 PIN
NET
Pin Function on the Module
1
CPU1_TDO
CPU1 Test Data Out
2
CPU1_TDI
CPU1 Test Data In
3
COP_RUN_STOP_N
Common On-Chip Debugger (COP) Software Run/Stop
4
CPU1_TCK
CPU1 Test Clock
5
CPU1_TMS
CPU1 Test Mode Select
6
COP_SRST_N
Common On-Chip Debugger Software Reset
7
COP_HRST_N
COP Hardware Reset
8
CPU1_CKSTPO_N
CPU1 Checkstop Out
P2 PIN
1
NC
No Connect
2
COP_TRST_N
COP Test Reset
3
V3P3_COP_VDD_SENSE
Ensures that the COP is aware whether 3.3V power is applied to
the module
4
CPU1_CKSTPI_N
CPU1 Checkstop In
5
ICE_EN_N (connect to GND)
In Circuit Emulator Enable
6
GND
Logical Ground
8
NC
No Connect
8
GND
Logical Ground
Summary of Contents for AMC131
