PT AMC123, User Manual

Page: 56 / 104

Chapter 4: System Monitoring and Alarms
56
The Spec Ref column indicates where in the relevant specification a command is defined. IPMI
references are to v1.5 unless indicated otherwise. The MMC Req column indicates if a
particular command is required by the relevant specification ( AMC Specification or HPM.1
Specification ) or is optional. See the various notes under the table for more information.
Table 4-1: IPMI/PICMG Command Subset Supported by the MMC Firmware
Command Spec Ref NetFn CMD MMC Req
IPM Device “Global” Commands
Get Device ID 17.1 App 01h Mandatory
Cold Reset 17.2 App 02h Optional
Warm Reset 17.3 App 03h Optional
Broadcast “Get Device ID”
1 17.9 App 01h Mandatory
Messaging Commands
Set BMC Global Enables 18.1 App 2Eh Mandatory
Get BMC Global Enables 18.2 App 2Fh Mandatory
Clear Message Flags 18.3 App 30h Mandatory
Get Message Flags 18.4 App 31h Mandatory
Get Message 18.6 App 33h Mandatory
Send Message 18.7 App 34h Mandatory
BMC Watchdog Timer
Reset Watchdog Timer 21.5 App 22h Mandatory
Set Watchdog Timer 21.6 App 24h Mandatory
Get Watchdog Timer 21.7 App 25h Mandatory
Event Commands
Set Event Receiver 23.1 S/E 00h Mandatory
Get Event Receiver 23.2 S/E 01h Mandatory
Platform Event (a.k.a. “Event Message”) 23.3 S/E 02h Mandatory
Sensor Device Commands
Get Device SDR Info 29.2 S/E 20h Mandatory
Get Device SDR 29.3 S/E 21h Mandatory
Reserve Device SDR Repository 29.4 S/E 22h Mandatory
Get Sensor Reading Factors 29.5 S/E 23h Optional
Set Sensor Hysteresis 29.6 S/E 24h Optional
Get Sensor Hysteresis 29.7 S/E 25h Optional
Set Sensor Threshold 29.8 S/E 26h Optional
Get Sensor Threshold 29.9 S/E 27h Optional
Set Sensor Event Enable 29.10 S/E 28h Optional
Get Sensor Event Enable 29.11 S/E 29h Optional
Get Sensor Event Status 29.13 S/E 2Bh Optional
Get Sensor Reading 29.14 S/E 2Dh Mandatory
FRU Device Commands
Get FRU Inventory Area Info 28.1 Storage 10h Mandatory