PT AMC123 User Manual Download Page 50 | Manualshive

Page: 50 / 104

background image

Chapter 3: Getting Started

50

Installing the Operating System

For more detailed information about your operating system, refer to the documentation
provided by the operating system vendor and to the PT Web site.

To install the operating system:

1. Install peripheral devices. AMC devices are automatically configured by the BIOS during the boot

sequence.

2. Most operating systems require initial installation on a hard drive from a USB CD/DVD or PXE. These

devices should be configured, installed, and tested with the supplied drivers before attempting to load
the new operating system.

3. Read the release notes and installation documentation provided by the operating system vendor. Be

sure to read any readme files or documents provided with the OS as these typically note
documentation discrepancies or compatibility problems.

4. Select the appropriate boot device order in the setup boot menu depending on the OS installation

media used. To boot from a USB CD/DVD, first connect the USB drive, then enter the BIOS setup
utility and move the “CD-ROM” device to the top of the boot list (or above any other bootable
devices). See

“USB CD/DVD,” on page 50

.

5. Proceed with the OS installation as directed, being sure to select appropriate device types if

prompted. Refer to the appropriate hardware manuals for specific device types and compatibility
modes of PT products. A link to PT manuals is available in the topic

“User Documentation,” on page

6. When installation is complete, reboot the system and set the boot device order in the setup boot

menu.

Note:

For more information about the BIOS setup utility, see the topic

“BIOS Configuration

Overview,” on page 46

USB CD/DVD

To run the BIOS setup utility with a bootable OS installation CD or DVD in an external USB drive:

1. Cable an external USB CD/DVD drive to the USB port on the AMC123.

2. Ensure the USB CD/DVD drive is powered on.

3. Insert the bootable OS installation CD/DVD into the drive.

4. Run the AMC123 BIOS setup utility by hitting the F2 key while the module is booting up.

5. Ensure that the USB device is listed in the Boot Devices and is above any other device that may have

a bootable OS image (i.e. hard drive).

a. Use the right arrow key to highlight the

Bootcategory

in the setup menu. The

Boot Settings

information appears in the main setup screen.

b. Arrow down to

Boot Device Priority

and press

<Enter>

. The boot order list appears and the top

position in the boot order is highlighted.

c. Press

<Enter>

. A dialog box with a list of boot devices appears.

«
...
48
49
50
51
52
...
»

Summary of Contents for AMC123









































































































Reviews:

No comments

Related manuals for AMC123

Brand: Velleman Pages: 28

Brand: NAD Pages: 24

Brand: zapco Pages: 71

Brand: Zenith Pages: 8

Brand: Fairchild Pages: 8

Brand: KAM Pages: 4

Brand: Atlona Pages: 10

Sonic Frontiers Power 1

Brand: Sonic Frontiers Pages: 17

Brand: Glensound Pages: 15

Brand: Genz Benz Pages: 6

Brand: Altinex Pages: 10

Brand: Texas Instruments Pages: 25

Strain Gauge/Load Cell Bridge Amplifier FBDA

Brand: B&B Electronics Pages: 10

Jazz Chorus JC-90

Brand: Roland Pages: 10

Brand: W.E.S.T. Elektronik Pages: 48

Brand: McIntosh Pages: 36

Brand: RVR Solar Pages: 86

Brand: GME Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands