PT AMC123 User Manual Download Page 104 | Manualshive

Page: 104 / 104

background image

Chapter 10: Data Sheet Reference

104

Ethernet

Ethernet is implemented on the AMC123 via the GbE controller on the Intel EP80579
Integrated Processor and the Marvell 88E1141/88E1145 Quad GbE Transceiver. For more
information about these devices, refer to the following Web sites:

http://www.intel.com/design/intarch/ep80579/index.htm

•

http://www.marvell.com//files/products/transceivers/alaska_gigabit/88E1141_1145-001.pdf

Module Management Controller

The MMC is implemented with Atmel's 8-bit microcontroller with 128 KB in-system
programmable flash. For more information, the following datasheet can be downloaded from
the Atmel Web site:

http://www.atmel.com/dyn/resources/prod_documents/doc2467.pdf

See the Intel IPMI home page for information concerning the Intelligent Platform Management
Interface, including the

Intelligent Platform Management Interface v1.5 Specification

and the

Intelligent Platform Management Interface Implementer's Guide

:

http://developer.intel.com/design/servers/ipmi/spec.htm

PICMG Specifications

The AMC123 is compliant with the following PICMG specifications:

•

PICMG AMC.0, R 2.0 – Advanced Mezzanine Card Base Specification

•

PICMG AMC.1, R 1.0 – PCI Express and Advanced Switching

•

PICMG AMC.2, R 1.0 – AMC Gigabit Ethernet/10 Gigabit XAUI Ethernet

•

PICMG AMC.3, R 1.0 – AMC Storage

These specifications can be purchased from PICMG (PCI Industrial Computers Manufacturers
Group). A short form specification in Adobe Acrobat format (PDF) is also available on PICMG’s
Web site at:

https://www.picmg.org

User Documentation

The latest PT product information and manuals are available on the PT Web site. BIOS and
driver updates are also available from this site:

http://go.pt.com/amc123

«
...
102
103
104

Summary of Contents for AMC123









































































































Reviews:

No comments

Related manuals for AMC123

Syn Power 2.050

Brand: Macrom Pages: 26

Brand: E&I Pages: 13

Brand: Fender Pages: 20

Brand: Fender Pages: 11

Super Sonic 112

Brand: Fender Pages: 4

Brand: Fender Pages: 20

Brand: VINCENT Pages: 48

Brand: Audio Note Pages: 15

Go Wireless Series

Brand: Vernier Pages: 3

Brand: TacT Audio Pages: 50

ACOUSTIC AC 801 P

Brand: Mark Acoustic Pages: 8

Brand: Genz Benz Pages: 8

Brand: Glensound Pages: 15

Brand: E&Q Pages: 14

Brand: ValveTrain Amplification Pages: 7

Brand: Nakamichi Pages: 16

Brand: Talk electronics Pages: 7

Brand: Harris Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands