Psion 8585, User Manual

Page: 97 / 106

Appendix A: Psion Config Program
FBWF Configuration
A-25
Psion 8585/8595 Vehicle-Mount Computers User Manual
• When the desired configuration is complete: Don't forget to save the settings.
A.14.2.2 Exceptions for Write Protection
Here you can define exceptions for write protection. Entire directories or individual files can be specified.
Changes to files on the exception list are written directly to the file system, as usual.
The left column of the menu shows the currently set FBWF configuration; the right column shows the newly
defined configuration after the computer is restarted.
Figure A.17 Exceptions to write protection
Current Exception List
The currently valid settings are displayed.
• When the desired configuration is complete: Don't forget to save the settings.
A.14.2.3 Modified Files in the Cache
When FBWF is active, files are shown here that are protected by FBWF and that were changed during the
run time.
The following is possible here:
• apply changes and write them to the file system
Compress cache memory Memory content is compromised
Show warning info over a charg-
ing level of Enter the percentage load factor of the reserved memory at which the warning
message should be displayed.
Protected drives Add/Remove
The hard drives listed here are protected from changes. After clicking on Add or
Remove , a list of hard drives is displayed.
Table A.6 Configuration after restart
Parameter Description
Write protection enabled Enable FBWF; the computer must be rebooted to activate the settings.
Table A.7 Exceptions after Restart
Parameter Description
Add/remove After clicking on Add or Remove , a list of hard drives and files is displayed.