Psion 8585, User Manual

Page: 101 / 106

Appendix A: Psion Config Program
Command Lines Parameter IMPORT (only for administrators)
A-29
Psion 8585/8595 Vehicle-Mount Computers User Manual
A.15.1 Command Lines Parameter IMPORT (only for administrators)
The parameter IMPORT is available for import using batch job (Psion Config V 2.3 and higher).
Example: PsionCfg IMPORT=<Path>AnyExportedData.cfg
The CFG file to be imported must be generated using export from Psion Config.
The CFG filename must contain the entire path (or at least ".\" for the current directory).
Other parameters for control of the batch import are:
Please note:
• To activate the imported data the computer must be restarted.
• Output redirection functions in a file with “>”, however the output is still additionally written to the
console window.
A.15.2 Info Header of an Export File
The info header of an export file contains the following information:
;------------------------------------------------------
; Psion Config export file
; Exported from computer: MPC5XPEMBSP2
; Hardware serial-number: 205004056587
; Export timestamp (YMD): 2005/06/18 20:30:13
;------------------------------------------------------
[General]
PsionCfgExportVer=1
PsionCfgExportSNR=205004056587
NONET The data from the config module “network” will NOT be imported
STATNET
Static IP addresses will be imported and set during batch import.
Default: Static IP addresses will NOT be imported.
Caution:
Property
Damage NO warning/request appears when using the COM2!
NO warning appears with information about the non-permitted mixing of configurations
between AC and DC devices.