Psion 8585, User Manual

Page: 77 / 106

Appendix A: Psion Config Program
Starting the Program
A-5
Psion 8585/8595 Vehicle-Mount Computers User Manual
Only ASCII files can be loaded at this time. UNICODE is not supported.
Loading language files
Text files for Psion Config are loaded when the program is started. If a text file is not available in the desired
language, the system default text (in English) is used for the dialogs.
Command line parameters
The parameter MAKETEXT is available to translate software into foreign languages. This means text re-
sources can be exported to *.txt files. Each time a file is created, a message appears prompting the user to
confirm it. Simply add the language code to the end of this newly generated text file. For example,
PsionCfg_.txt would then be PsionCfg_ENG.txt if it contained the English text. During text file generation,
files with the same name are automatically overwritten. English is the system default language. It does not
need to exist as a text file. The program terminates once the text files have been generated.
A.3.6 Starting the Program
Start Psion Config via the Windows Programs menu under Start .
A.3.6.1 Password Check
If a password was entered in the Psion Config Settings menu, this will be requested when starting the pro-
gram. The password is case-sensitive; the program terminates after three incorrect entries.
The default password ex works is gold . Please change this in the Settings menu to suit your requirements.
A.3.6.2 Accessing Config with WES 7
As of software version 3.10, there are two different ways to access Psion Config from the Start menu in
WES 7 based on User Account Control (UAC).
A.3.6.3 FBWF Advice at the Start of the Program
If the hard drive on which the config files are saved is enabled for FBWF , the following message appears at
the Psion Config start-up:
Figure A.2 Psion Config information: FBWF is activated
De-activate the FBWF Filter , if necessary.
ENG English CHS Chinese
GER German KOR Korean
FRA French DNK Danish
ESP Spanish JPN Japanese
SWE Swedish GRC Greek
ITA Italian
Read only start program, read-only access
Run as Administrator start program, full write access