2
EDDYSENSOR Operating Manual
The diagram shows the backplate of the EDDYSENSOR. The inputs and outputs are also shown. The output
signal for the configuration without the Delay Unit is taken from the backplate of the Front End Unit whereas for
the configuration with the Delay Unit, the delayed output signal is taken from the potential-free output on the
backplate of the Delay Unit.
EDDYSENSOR with Delay Unit
Backplate connections of the EDDYSENSOR
IMPORTANT
Whenever a module is removed or inserted
ensure that the power is
OFF
and the mains plug pulled
OUT
.
Also, the ESD instructions given on the separate sheet
at the front of this handbook must be observed
when any work is carried out on the equipment.
Voltage switch
between 115V/230V
Socket for
power supply
Delayed and undelayed
signal outputs for the
configuration with the
Delay Unit
Analog signal to
display the defect,
e.g. on a recorder, bar
graph or oscillo-
scope
Defect output of an
undelayed digital
signal for switching
peripherals such as
PLC, warning units,
etc.
Input signal from the
line encoder
Coil
