20
8.1.5
Can gap detection
Sensor occupancy
Signal
Setting
No can
low
ON-delay = off
OFF-delay = on
Sensor1 = switched-on with no can and then one
turn backwards.
Sensor2 = switched-on at can presence and
then one turn onwards.
Single can moving
pulse
Single can moving quickly
pulse
Single can motionless
undefined,
depends on can
position
Multiple cans moving
high
Multiple cans moving quickly
high
Multiple cans with gap
pulse / low
Multiple cans motionsless
high
8.1.6
Ignore can gap
Sensor occupancy
Signal
Setting
No can
low
ON-delay = Off
OFF-delay = On, adjust so that the desired
gap length is no longer detected at constant
speed. Setting must be higher than in 8.1.5.
Sensor1 = switched-on with no can and then
one turn backwards.
Sensor2 = = switched-on at can presence
and then one turn onwards.
Single can moving
pulse + delay off
Single can moving quickly
pulse + delay off
Single can motionless
undefined, depends
on can position
Multiple cans moving
pulse + delay Off
Multiple cans moving quickly
high
Multiple cans with gap
Low
Multiple cans motionsless
undefined, depends
on can position
