14
2.4 Warranty
During the first year following the date of sale, PROXITRON GmbH will replace or repair parts that are
defective due to errors in design or manufacture. Differing provisions may be agreed on in writing at
the time of purchase of the equipment. If return for repair under warranty has been agreed to, please
send the equipment back to PROXITRON GmbH.
Proxitron GmbH
Robert-Bosch-Str. 17
25335 Elmshorn
The warranty will lapse if the equipment has been opened, taken apart, altered or destroyed in some
other way. The warranty will also lapse if the equipment has been used incorrectly, or has been used
or stored under conditions that do not correspond with the specifications in the technical data.
PROXITRON GmbH will not be liable for destruction or losses, including losses of profit and
consequential damage, that may occur in the use of the equipment or that arise from defects in the
design and manufacture of the equipment.
The vendor gives no warranty that the equipment can be used for a particular application that the
customer has in mind.
2.5 Copyright
All rights and modifications reserved. The right is reserved to amend the information and technical
data contained in these documents, even without prior announcement.
No part of these documents may be copied, processed, distributed or transmitted in any other way
without explicit written authorization from the manufacturer.
No warranty is given of the correctness of the content of these documents.
2.6 Statement
PROXITRON GmbH reserves the right to make alterations that serve technical progress.
2.7 Safety warnings
The DLU should be used only for the purpose as intended for and in proper condition.
Read these operation and safety instructions carefully and observe them while using the equipment.
The DLU can be opened for repair works only by the manufacturer or by authorized personnel under
the manufacturer instruction.
Compliance with all specified operating conditions is necessary.
Failure to observe recommendations, or improper use, may cause injury to the user or damage to the
DLU.
Do not plug or unplug cable connectors under voltage. All electrical installations must be performed
while power is off.
3 Introduction
3.1 Scope of supply
Proxitron can line sensor DLU 001.28 GZ S4 DLU 010
Note:
where equipment is supplied with a connecting plug, suitable connecting cables are not
included in the supply. Please order the required cables separately in the length you desire.
