User’s Guide • 2–9
Chapter 2 • Setting Up the Projection Panel
Serial Port
Connection
(To Panel)
A separate Microsoft-compatible mouse can be connected to the
SERIAL port connector on the projection panel to control the
panel’s built-in LightBoard drawing capability. This mouse can
also be used to navigate the panel’s menus in Local Mode (see
page 3-6) or function as the computer system’s mouse in Host
Mode.
DEO IN
SERIAL
CYCLO
Figure 15
The projection panel’s SERIAL port connector
TV video (NTSC, PAL or SECAM) may be displayed on
video-ready projection panels. Find the circular connector on the
camcorder, laserdisc player, VCR, or other video source marked
Video Out or something similar. This connector accommodates
the RCA cable supplied with video-ready panel models. On most
video equipment, this connector will be yellow.
S-VHS
VIDEO IN
SERIA
Figure 16
The projection panel’s VIDEO IN connector for
NTSC/PAL/SECAM
The projection panel comes with an audio-visual cable with three
RCA connectors on each end.
1. Insert one of the cable’s yellow connectors into the VIDEO
OUT jack of the video source device.
2. Insert the other yellow connector into the projection panel’s
yellow VIDEO IN connector.
The audio-visual cable’s remaining connectors (red and white) can
be used to attach audio (see Audio Connections, page 2-11).
Video
Connections
