User’s Guide • 3–25
Chapter 3 • Using the Projection Panel
A set of customized values for every video mode (VGA,
Macintosh II, NTSC/PAL/SECAM, etc.) can be stored for the
Default user, User A, or User B.
To save a custom setting:
1. Select Default, User A, or User B under the User Menu in the
Advanced Menu.
2. Make any projection panel adjustments desired (these changes
only affect the currently displayed mode).
When you change a setting, two small bars appear to indicate
the factory default values for that setting. These bars will
disappear when you use the Remote Control, Cyclops or
mouse to return to the setting’s default.
Contrast Brightness
Tint
Saturation
Input Source
Image
Audio
Preferences
Advanced
MENUS
LightBoard
Cyclops
Normal View
Fit to View
Zoom
Figure 36
Default and current settings
3. Close the menus to save changes.
The adjustments are recalled simply by selecting the correct User
(the Default user is the default upon power up; select User A or B
as required). The projection panel then recognizes the video input
and recalls the customized settings.
