Waiting ....
OK
11.1. PC INTERFACE AND PROGRAMMING
Switch on the PC and open a new folder ( “Nadir “ ) in My Documents. Then copy program “nadir.exe” from
the supplied diskette into the new folder.
Turn on the controller and access the service mode.
Select the screen below.
NOTE !
Blinking fixture LEDs on the controller indicate
transmission of data between the controller and the
PC. Once your work has been completed and the
flashing stops , press F twice.
E
F
19
Press E or F.
PC comunication
Connect COM 1 or COM 2 on your PC with the RS-232 port on tne controller , using cable supplied with the
unit.
NOTE !
Both the PC and the controller should be switched off.
In the program menu on your computer screen select
“Action “. You can now download new fixture libraries , new
programming, as well as read and create new programs.
next. prev. Enter
