A
11. SERVICE MODE
The service mode incorporates following functions - change of password , downloading new software
releases , blocking access to functions , and confirmation of payment.
NOTE !
All functions of the controller are disabled when the service mode is being accessed.
Th e controller is equipped with a standard RS-
232 port , allowing the controller to be hooked
up to a PC. The port is used to download new
software releases and new fixture libraries. It
can also be used to offload controller’s
memory onto a PC. This allows the user to
save and archive programming onto floppy
diskette. Programming done on a PC can also
be transferred into controller’s memory. A
program allowing communication between the
controller and a PC is included with the
controller.
Password set-up. The password locks out
access to the service mode..
Payment confirmation.
The controller can be supplied from the
manufacturer with a password and a time limit.
Once full payment is received by the
manufacturer , the user will be supplied with a
password to confirm the payment. Otherwise
the unit will stop functioning once the time limit
has been exceded.
System restart.
Programming lockout.
Configuration lockout.
Configuration lock
System restart
A
B
E
F
C
D
Next screen.
Previous screen.
Command
confirmation.
18
With the shown screen displayed on the LCD ,
tap A. This is the first screen to appear upon
turn on.
NOTE !
Service mode can only be accessed from
this screen.
Px 102 Nadir versjon 1.10
Proxima s.c.
User password change
next. prev. Enter
User password change
next. prev. Enter
Payment confirmation
next. prev. Enter
next. prev. Enter
next. prev. Enter
Programming lock
next. prev. Enter