auto 44 12,4 set.
1 3 9 11 33 45 63 All
33
3
35
1
34
Set the position of the cursor with the
encoder. Lower line of the LCD shows
program synchronization information , of
the highlighted program.
To change synchronization parameters
press F.
auto 44 12,4 canc OK
Synchr. X-F Rate Pgm: 15
auto 44 12,4 canc OK
manual 2 canc OK
audio canc OK
MIDI canc OK
Synchr. X-F Rate Pgm: 15
Synchr. Scene Pgm: 15
Synchr. Pgm: 15
Synchr. Pgm: 15
P l a y b a c k o f p r o g r a m s i s
controlled by the internal clock.
Its parameters are rate in
seconds, and crossfade ( X-F ) in
%. They can be adjusted with the
RATE and X-FADE ( crossfade )
faders.
C
D
Press C or D to control the
program manually , one scene at
a time ( forward or backward ).
The program is controlled by audio , through the
audio input at the back of the console.
NOTE !
Adjust audio sensitivity at the back of the
console. This will assure proper audio
synchronization.
The program is controlled through MIDI , by an
external MIDI controller. See detailed MIDI
instructions on page 10.
Up to 7 programs may be played back
simultaneously. Programs are played back
by pressing program buttons. To trigger
programs 33 - 64 press the “33 - 64” button
in the program button section. A flashing
program LED indicates the program is in
the other bank.
Press A or B to choose synchronization mode.
9. PROGRAM PLAYBACK
A
B
14
To confirm settings for each program press F or press E to cancel. Then with the cursor select the next
program and adjust its parameters. When the parameters for all programs are set press ENTER to record the
settings in the memory..
NOTE !
By turning the program off ( program LED off ) before pressing ENTER , previous setting will be retained.
Select program ...
X
F
A
D
E
R
A
T
E
Program version : 1.10
Library : 1. 0 OK
