Press D to enable the review of assigned
fixtures function.
Press E (Clr.) to remove the displayed fixture
(Martin Mac 250 for ex.) from all program(s)
were it was used.
Martin Mac 250
6 - + Del. Clr. OK
Press B or C , or use the encoder to scroll
through all assigned fixtures. The LCD will
show name / model of the fixture. Below it a
fixture number will appear. At the same time
fixture LEDs will light up. A blinking fixture LED
indicates that the fixture is assigned to the
second fixture bank, i.e. 33 - 64.
D
Press D to cancel
fixture assignment.
D
C
B
7
E
Not assigned !
6 - + Del. Clr. OK
With A or B select one of the assigned fixtures.
The LCD will show proper dip switch setting for
that fixture.
0 = OFF 1 = ON
C
D
A
B
5.2.2. DIP SWITCH SETTINGS
Fxtr 1 addr 100010000
- + = 17 back
Press C or D.
5.2.3. DMX DELAY
Delay = 0
- + back
The DMX DELAY function allows slowing down of the
DMX signal to match the "receive" speed of the fixture.
The DMX DELAY settings are 0 to 7.
E
F
DIP SWITCH SETTING - indicates correct dip switch
settings of assigned fixtures.
Press CONFIG in the programming section (see
page 5). With the screen shown on the left press C or
D under "Fixtures".
Select fixtures:
( 1-32 ) review back
Ch. Assign Mode
I ( 1 ) Fixtures
Special
fnctns
Fixtures:
Models
Dip
switch
DMX
delay
Fixtures:
Models
Dip
switch
DMX
delay