8. PROGRAMMING A SHOW
MIDI
CONFIG
SHOWS
SCENES
F
New s creen will appear ( as shown ) on the LCD. .With A
or B select the show number , and with C or D the step
number. With the program buttons select programs to be
included in the first step of the show.
Press E to select NW ( new show programming ) or ED
( review and editing of previously recorded show ).
Start 0,00.0 Time: 0,00.0
Show 1 Step 1 ED
Start 0,00.0 Time: 1,36.7
Start 0,00.0 Time: 4,13.7
Show 1 Step 1 ED
Show 1 Step 1 ED E
C
E
D
A
B
The clock indicates the time
elapsed from the beginning of
the show.
Each show may consist of up to 256 steps. If the show
has less than 256 steps , press F before pressing
ENTER to record the last step.
13
With the "Select program ..."
screen showing on the LCD
p r e s s S H O W S i n t h e
programming section.
NOTE !
All LEDs should be off in the
fixture / program section.
A show is a sequence of programs linked together. Each show
may consist of up to 256 steps. Each step may contain up to 7
programs.
NOTE !
This function may be blocked.
Consult SERVICE MODE section.
ENTER
With the encoder set the time from the
beginning of the show , when the
programs included in the first step are to
be triggered.
Setting next step number automatically
sets the end time for the previous step,
and the start time for the next step.
Press ENTER to record the step in the
memory.
Select program ...