MP.11 and MP.11/a Quick Install Guide
Chapter 5. Web Interface
46
You can enter the following details:
System Name
This is the system name for easy identification of the MP.11/a Base Station or SU.
Use the system name of a Base Station to configure the
Base Station System Name
parameter on an SU if
you want the SU to register only with this Base Station. If the
Base Station System Name
is left blank on
the SU, it can register with any Base Station that has a matching
Network Name
and
Network
Secret
.
Country (Tsunami MP.11a units only)
The Dynamic Frequency Selection (DFS) and Transmit Power Control (TPC) features are enabled
automatically when you choose a country with a regulatory domain that requires them. The
Country
selection pre-selects and displays only the allowed frequencies for the selected country. Click the
Configure
button, the
Interfaces
tab, and the
Wireless
sub-tab to see the channel/frequency list.
Note:
MP.11a radios sold in the United States are pre-configured to scan and display only the outdoor
frequencies permitted by the FCC. No other
Country
selections, channels, or frequencies can be
configured. MP.11a radios sold outside of the United States and Canada support the selection of a
Country
by the professional installer.
Support for the 5.25 – 5.35 GHz and 5.725 – 5.825 GHz frequency bands is provided with a single country
selection,
UNITED STATES (US)
,
which does not provide DFS capability in these frequency bands.
For a non US-only device, the default country selected is
United Kingdom (GB)
.
Notes:
(1) The channel center frequencies are not regulated; only the band edge frequencies are
regulated.
(2) If, before upgrade, US was selected as a country for a non US-Only device (which is an
incorrect configuration), the country is changed automatically to United Kingdom upon upgrade.
See “Dynamic Frequency Selection” on page 82 and “Transmit Power Control” on page 57 for more
information. See “Country Code Table” on page 119 for a list of country codes.
Location
This field can be used to describe the location of the MP.11a, for example “Main Lobby.”
Contact Name
,
Contact Email
, and
Contact Phone
In these fields, you can enter the details of the person to contact.
Mode of Operation
This field lets you choose one of two operating modes:
Bridge
mode or
Routing
mode.
Temperature Logging Interval
This field lets you configure the temperature logging interval (in 5-minute intervals). See “Monitor: 12)
Temperature Log” on page 89 for more information.
The static fields on this window are described as follows:
ObjectID
This field shows the OID of the product name in the MIB.
Ethernet MAC Address
The MAC address of the Ethernet interface of the device.
Descriptor
Shows the product name and firmware build version.
Up Time
How long the device has been up and running since the last reboot.
