MP.11 and MP.11/a Quick Install Guide
Chapter 5. Web Interface
34
Soft Reset to Factory Default
If necessary, you can reset the MP.11/a to the factory default settings. This must be done only when you are
experiencing problems. Resetting to the default settings requires you to again configure the MP.11/a.
To reset to factory default settings:
1. Click
the
Commands
button, then the
Reset
tab.
2. Click
the
Reset to Factory Default
button. The device configuration parameter values are reset to their
factory default values.
If you do not have access to the MP.11/a, you can use the procedure described in “Hard Reset to Factory Default”
on page 125 as an alternative.
GENERAL SETTINGS
System Status
To view the current system status, click the
Status
button. The
Status
window is the first page you see when you
log in.
See “System Status” on page 43 for more information.
