Provo Craft Cricut Imagine, User Manual

Page: 34 / 140

34
TRoUBLESHooTInG
troUBLesHootInG
tIP: For our complete list of frequently asked questions, plus the latest up-
dates to the User Manual, visit www.cricut.com .
Problem
: The cutting mat won’t load when I click
Go!
and try to feed it into
the machine.
+ solution 1 : Try pushing the cutting mat slightly into the roller bar as you
click Go!
+
solution 2
: Apply constant, gentle pressure to the mat as you click
Go!
+
solution 3
: Reset the printer by raising the ink access door and then
lowering it back into place.
+ solution 4 : Turn the Cricut Imagine
™
off, and then turn it back on and
attempt to load the machine.
Problem: The cutting mat didn’t load when I clicked the Go! key.
+ solution 1 : Your Cricut Imagine
™
thought that it loaded the mat, even if it
didn’t pull it in. Follow the on-screen instructions to retry to load the mat.
+
solution 2
: Apply slightly higher pressure and try to reload the mat by
pressing Go! or the Play button.
Problem : The blade is not cutting all the way through the paper.
+ solution 1 : Use the Multi-Cut function in the Project Preview screen to
allow for multiple cuts along the same cutting lines.
+
solution 2
: Increase the cut pressure in the Project Preview screen.
+
solution 3 : The blade depth may need to be adjusted, particularly if you
are trying to cut through thicker materials.
+ solution 4 : The cutting blade may have become dull and needs to be
replaced. Refer to the
replacing the Cutting Blade
section on page 20.
Problem : The paper lifts off the mat as the Cricut Imagine
™
machine is cutting.
+ solution 1 : Make sure you press the paper firmly onto the cutting mat
when setting up the cut.
+ solution 2 : Rinse the mat with water while gently rubbing off the paper lint
on the mat. Let the mat thoroughly dry before attempting to re-use the mat.