manualshive.com logo in svg

Protogate Freeway 3414, Hardware Maintenance Manual, Page: 12 / 72

Share
Download
Protogate Freeway 3414 Hardware Maintenance Manual Download Page 12

12

DC 900-2031A

Freeway 3414/3414R Hardware Maintenance Guide

Chapter 4

 describes how to replace an ICP board, disk drive, CDROM drive, or CPU

 

battery.

Chapter 5

 describes how to install a new ICP or Ethernet board.

Appendix A

 lists the hardware specifications.

Appendix B

 describes how to pack the Freeway for shipping. 

References

 

Document Conventions

The term “Freeway” refers to both of the Freeway models, 3414 and 3414R.

Revision History

The revision history of the 

Freeway 3414/3414R Hardware Maintenance Guide

, Proto-

gate document DC 900-2031A, is recorded below:   

•

Freeway 3414 Hardware Installation Guide

DC 900-2028

•

Freeway User Guide

DC 900-1333

Document Revision

Release Date

Description

DC 900-2031A

September 2019

Original release

07/01/99 
Ginni: 
Reworked 
table to show 
only released 
(or almost 
released: 
1651 and 
1677) docs. 
Moved 
restricted 
docs.

Summary of Contents for Freeway 3414









































































Reviews:

No comments