Protogate Freeway 3414, Hardware Maintenance Manual, Page: 46 / 72

46 DC 900-2031A
Freeway 3414/3414R Hardware Maintenance Guide
4.2 Replacing a Disk Drive
To replace a drive, use the following procedure:
1. Shut down and power off the Freeway using the procedure described in
Section 2.1 on page 28 .
2. Insert the disk drive key into the round lock on the disk drive tray (see Figure 4–
3 ). Turn the key one quarter turn to unlock the tray. Remove the key.
3. Push the eject tab below the lock until it pops out (see Figure 4–3 ). Push the tab
back in to eject the drive tray. You may have to push the tab in a few times until
you feel it “catch” on the drive tray.
4. Remove the drive tray then push the eject tab back in to it is flush with the front
of the drive.
Figure 4–3: Disk Drive Tray