Protogate Freeway 3414, Hardware Maintenance Manual, Page: 15 / 72

DC 900-2031A 15
Safety Precautions
Be sure to take the following safety precautions during installation and maintenance of
the Freeway:
•
Observe the warnings and directions printed on the Freeway and its associated
equipment.
•
Check the electrical rating label on the Freeway chassis. Be sure that the voltage
of your power source matches this rating.
•
The Freeway must be plugged into a grounded, three-wire power outlet. Do not
use an adapter that permits a three-wire electrical cord to be plugged into a two-
wire power outlet.
•
Use appropriately rated extension cords or power strips only.
•
To ensure proper cooling, always operate the Freeway with its covers in place. Do
not cover or block any of the openings on the Freeway chassis. Do not place the
unit near a heater.
•
Do not insert objects through openings in the Freeway chassis. Doing so could
result in a short circuit that might cause a fire or an electric shock.
•
Do not modify the Freeway equipment in any way. Protogate, Inc. is not respon-
sible for regulatory compliance of any Freeway that has been modified. Altering
the Freeway enclosure in any way other than the installation of Protogate-pro-
vided options may invalidate Freeway’s safety certifications.
•
Always unplug the Freeway AC power cord before removing the top or bottom
covers for servicing.
05/12/98:
Per Jean, I
am leaving
only the
English
version of
this in for
now. I also
changed the
spacing
above and
below
everything so
it would all
fit on one
page.
08/06/99:
Molly needs
this in a few
hours, so I’m
not trying to
kluge the
1532 safety
for SR.