manualshive.com logo in svg

Protogate Freeway 3414, Hardware Maintenance Manual, Page: 67 / 72

Share
Download
Protogate Freeway 3414 Hardware Maintenance Manual Download Page 67

DC 900-2031A

67

Appendix

B

Packing the Freeway for 
Shipment

Caution

Please keep the original box and packing material

. To avoid

 

damage during shipment, please use the original box and packing

 

material when shipping your Freeway.

Packing Specifications

The packing material must meet the following specifications:

•

The box must use double-wall construction and have dimensions of approxi-

mately 24" x 22" x 12 3/4".

•

The original foam inserts can be replaced by 4" foam-in-place packaging.

Shipping and packing material can be purchased from your local FedEx/UPS store or 

from other shipping supply companies (such as ULINE, etc.).

Packing Instructions

1. Secure the bottom of the box with heavy duty staples and 3" reinforced, gummed

 

tape.

2. Insert the original foam packing material in the bottom of the box. If you do not 

have the original packing material, use 4" foam-in-place packaging

3. Place the Freeway in the static proof wrapping.

Summary of Contents for Freeway 3414









































































Reviews:

No comments