Proteco S-Park 4, User Manual

Page: 2 / 24

2
S-PARK - rev. 1.1_06_2020
INDEX
1. WARNING 4
2. TECHNICAL FEATURES 4
2.1 Main features 4
2.2 Life line 4
2.3 Electronics 5
3. INSTALLATION 6
3.1 Introduction 6
3.2 Preliminary checks 6
3.3 General layout 6
3.4 Basement preparation 6
3.5 Fixing the barrier on ground 7
3.6 Balancing of the boom 7
3.6.1
Right hand and Left hand mounting 7
3.6.2 Mounting of the boom 7
3.6.3 Manual operation 8
3.6.4 Limit switches 9
3.6.5 Mounting and adjusting of the spring 9
3.6.6
Balancing (boom in unlocked mode) 10
3.6.7 Photocells RF40 10
3.6.8 Led strip 10
3.6.9 Boom accessories 11
3.6.10 Mirror barriers (TWINNING) 11
3.7 Wirings 11
3.7.1
Main power 230V 11
3.7.2 Back-up batteries 11
3.7.3 Stand-alone antenna (optional) 12
3.7.4 Wiring diagram 12
3.8 Legenda of terminals 13
3.8.1
START – wired command contacts (key switch, key pad, timer) 13
3.8.2 STOP – emergency push button or similar devices 13
3.8.3 STRT2 (optional additional START contact) 13
3.8.4 PH – Closing photocell (N.C. dry contact) 13
3.8.5 +24 (SAFETY) Closing photocell (power) 13
3.8.6
+TX - Closing photocell (photocell test) 13
3.8.7 LD (Loop Detector) 13
3.8.8 +24, R, G and B (BOOM) LED signalling strip 13
3.8.9 DAT and GND (TWINNING) 13
3.8.10 AUX – Relay output 13
3.9 Quickstart guide 14
3.10 Locking the upper top cover 14
4. OPERATION 14
4.1 Working cycle 14
4.1.1 LED strip signalling mode - legenda 14
4.1.2 Automatic closing after power cut 14
4.1.3 Programming keys 15