Installation Guide
P. 21
3.
Within 20 sec. of engaging the parking
brake, press and hold , or
on the transmitter.
The parking lights will flash 3 times
quickly and remain lit.
-
4.
Remove the key: the engine will continue running.
5.
Exit the vehicle and close all doors, hood and trunk.
6.
Press for approx. 1 second either:
•
to lock the doors and shut down the engine;
•
to unlock the doors and shut down the engine;
•
to shut down the engine without affecting the doors.
7.
The parking lights will flash twice to confirm ready mode activation.
Arming and disarming of the System
The Alarm can be configured by the installer either to Passive Mode (so as to arm automatically)
or Active Mode (so as to require the user’s intervention for arming). By default, the Remote Car
Starter is configured to Passive Mode
1)
Passive mode:
a)
To arm the alarm, press the button on the transmitter, OR
i)
In Passive Mode, the alarm will automatically arm 30sec once the last door is
closed.
ii)
The LED on the antenna will flash quickly during the countdown preceding the
activation of the system.
iii)
Once the activation countdown expires, the siren will chirp once and the LED will
flash slowly to indicate that the alarm is now armed.
b)
To disarm the alarm, press the button on the transmitter.
i)
The LED on the antenna will flash quickly during the countdown preceding the
activation of the system.
ii)
The alarm will automatically rearm itself after 30sec if no door is left opened and
the ignition is not turned ON.
2)
Active Mode:
a)
To arm the alarm, press the button on the transmitter.
i)
The siren will chirp once.
ii)
The LED on the antenna will flash slowly.
b)
To disarm the Alarm, press the button on the transmitter.
i)
The siren will chirp twice.
ii)
The LED on the antenna will remain OFF.
