Installation Guide
P. 15
Wire
Description
4
BLACK/
BROWN
(–)
Priority door
output only
Gives a negative pulse on the second press of the button.
5
YELLOW
(–)
Parking
Light output
500 mA negative Parking Light output
Note: Ensure that the voltage does not vary when the dimmer control
switch is turned up or down. If this is the case, you have selected the
wrong wire.
WARNING! There is also a positive Parking Light output. Only one of
these two outputs needs to be connected.
Auxiliary Relay
Fifth Relay Output
Remote car starters of this series are
equipped with an on-board high-
current programmable 5
th
relay that
can be used to power a second
ignition, accessory or crank wire. The
unit uses 3 sets of pins; each set
corresponds to a specific function of
the output. In order to activate one of
the three possible functions, you must
place the jumper (supplied) on one of
the three sets of pins and connect the
14 AWG wire to the second
IGN. / ACC. /
CRANK
wire of the vehicle.
Caution!
Only one set of pins can be used at one time. Using more than one jumper may result in serious
damage to the vehicle.
The relay output rating on this unit is 25A at most. Defective OEM solenoid switches can
sometimes draw up to 50 or 60a, causing the 30A fuse to blow. Always verify your circuit with an
appropriate measuring device.
