MVI56E-FLN ♦ ControlLogix Platform
Configuring the MVI56E-FLN Module
FA Control Network Ethernet Communication Module
User Manual
ProSoft Technology, Inc.
Page 49 of 155
For this example, the data transfer takes place as described in the following
illustration (the Transmit Area in the TOYODA PLC must be configured inside
the Link Area):
5
Click
OK
to close the
Data Link
window, and then click the
N
ETWORK
button.
Configure the default parameters as shown in the following illustration:
Note:
This configuration sets the node address of the FL/ET-T-V2 module to
192.168.250.10 (the node address was configured as 10).
